M=LIGHT LED floodlight

M=LIGHT LED Lighting

  • Overview +


    The M=LIGHT LED is a state-of-the-art 1000W LED floodlight for real crash test facilities and crash simulation sleds.


  • Features +


    • No warm-up time – starts instantly
    • No runtime limitation
    • Less heat radiation onto test set
    • Continuous wave or strobe mode
    • 100 % more luminous intensity possible in strobe mode
    • Up to 25,000 full flashes per second (synchronization with camera)
  • Technical Information +


    Dimensions (LxWxD): 25.5 cm x 15.0 cm x 19.0 cm
    Design: ruggedized aluminium housing, active cooling
    Weight: 5.50 kg
    Light Technology: LED; starts instantly without warm-up time
    Power: 1000 W
    Luminous flux: up to 100.000 lm
    Color Temperature: Daylight 6500 K
    Illumination angle: 4 types: 23°, 37°, 56°, 71°
    Steady Light: dimmable 0-100%
    Flash Power: 200%
    Synchronization: up to 25.000 fps
    Control: CAN-Bus
    Input Voltage: 110V-265 VAC 47-63Hz @1000 W
  • Applications +


    Atlas uses LED floodlights to upgrade existing test facilities or build new lighting systems exploiting modern communication and monitoring possibilities. Below are examples of the most common test scenarios Atlas can reliably illuminate with either HMI or LED technology based systems.


    Real Crash: Side Impact and Barrier

    Lights Movement: x-,y-,z-axis, tilt, rotation
     
    Real Crash: Barrier

    Lights Movement: x-,y-,z-axis, tilt
     
    Real Crash: Rear Impact and Barrier

    Lights Movement: x-,y-,z-axis, tilt
     
    Real Crash: Car2Car pit

    Lights Movement: flexible on arms/stands
     
    Crash Simulation: Sled with catapult

    Lights Movement: z-axis, tilt