Testing of assembled components provides an advantage for evaluating the combination of potentially incompatible materials. An Atlas Walk-in allows testing of oversized samples and assembled components, such as motorcycles, electrical panels for outdoor use, household appliances, vehicle seats, pressurized cyclinders, bicycles, military items, ranch and farm machinery, snowmobiles, window/door assemblies and much more.
Installing MH (metal halide) or MHG (metal halide global) luminaries in Atlas Walk-in chambers increases the testing capabilities for any lab. NOW, entire assemblies and oversize samples can be tested for UV resistance, corrosion and other environmental conditions in the same unit.
Interior liner with sheet PVC for uniform thickness
Raised interior floor to accommodate drainage
Floor covered with rubber sheet or plastic mat
PlexiglasTM access port
Interior light with switch on exterior wall
Ambient to 120 °F (49 °C) exposure tone temperature
Interior shell of mild steel, primed on both sides
Testing Volume: 7,136 Litres - 11,893 Litres (depending on size of chamber)
Exposure Zone Dimensions: L x W x H
SF7000 - 6' x 6' x 7' (1.83m x 1.83m x 2.13m)
SF9500 - 8' x 6' x 7' (2.44m x 1.83m x 2.13m)
SF12000 - 10' x 6' x 7' (3.05m x 1.83m x 2.13m)
External Dimensions: L x W x H
SF7000 - 7' x 7' x 9' (2.13m x 2.13m x 2.74m)
SF9500 - 9' x 7' x 9' (2.74m x 2.13m x 2.74m)
SF12000 - 11' x 7' x 9' (3.35m x 2.13m x 2.74m)
Sloped ceiling prevents dripping of condensation onto samples
Microprocessor-based cycling controls for basic cycling testing
Fog stripper, manual operation
Timer for bubble tower
Precision air regulator
Solution spray with multiple nozzles
UL approval
External condensate collection package
High voltage kit (over 460 VAC)
High capacity oil & water extractor
Custom sizes (extra height / any LxW / drive-in or drive-through with overhead door) and configurations (pass-through electrical/mechanical ports)